Tempra 24 Plus

	Completely Redesigned The Tempra® series has been redesigned completely inside and out - upgraded heavy-duty electronics, a simple single flow sensor design, a hinged cover for easy access, and Advanced Flow Control™ for the Tempra® Plus. Welcome to the next generation of German quality. Unlimited supply of hot water The Tempra® continually heats water instantaneously as you require it - and only when you require it. The Tempra® unit completely replaces a conventional tank heater with no disruption to your comfort and hot water needs. Advanced Flow Control™ ensures the temperature remains constant no matter what! Tempra Plus featuring Advanced Flow Control. The Tempra® Plus is the most technologically advanced tankless water heater available on the market today. Advanced Flow Control is exclusive to the Tempra® Plus and ensures a constant temperature output no matter how great the hot water demand is. Advanced Flow Control technology works by automatically adjusting the flow of water to eliminate unpleasant temperature fluctuation. What that means to you is a consistently satisfying experience every time, all the time! Control temperature simply by setting a dial Set the knob on the front cover and enjoy water temperatures between 86°F (30°C) and 140°F (60°C). Change the desired temperature at anytime. Advanced microprocessor technology ensures that the water temperature never deviates from the set point. Tempra® Plus featuring a digital display and Advanced Flow Control™ Proven reliability Stiebel Eltron has an enviable track record of engineering excellence and product quality. The three years parts warranty is unique in the industry. You can depend on the Tempra® for many years to come. Sleek design fits in anywhere The Tempra® takes up considerably less space than conventional tank type water heaters and saves valuable living space. No venting required The Tempra® has several advantages over a gas-type tankless water heater. Compared to many similar gas tankless models the Tempra® is less expensive to purchase. Installation is also much simpler and cheaper since it is not necessary to vent a Tempra® to the outside. The venting that a gas unit requires causes anywhere from a 10 - 20% efficiency reduction from heat escaping out the exhaust pipe. Furthermore, for every cubic foot of gas burned, roughly two cubic feet of air have to be mixed in to create ideal combustion. In a cold climate, this hurts efficiency further. When a gas unit fires it draws in air around it, heats the water, and then expels warm exhaust outside. Since no house is airtight, this suction action causes a drafting condition where cold air from the outside seeps back in through door cracks and other parts of the house that may not be airtight. By nature of the design, the Tempra® is nearly 100% efficient; converting 100% of the electrical energy it consumes into heat. All that heat is then transferred to the water - none is lost to the outdoors.
Product Description
Back to Top

Tempra 15

	Stiebel Eltron Tempra™ 15 Electric Tankless Water Heater - Whole House The Stiebel Eltron Tempra™ 15 is one in a series of whole house water heaters, designed to suit individual situations and needs.
Product Description	The RTG-66DVP is a Indoor Tankless Water Heater that uses Propane Gas
Back to Top

Tempra 20

	Unit Provides 88F rise in water Temperature at 1.5GPM, 65F Rise at 2GPM, and 44F Rise at 3GPM This unit is desiged to work in cold areas where smaller units will not work. This unit will heat an average 2000sqf 3Bed 2Bath home, it will provide for 2 heavy water use applications at once, This means 2 showers can be taken at a time or other heavy uses, including tub filling which the smaller units just can't do. (Depending on ground water temperature) Breaker Requirement: two 50 AMP Recommend Wire Size: two 8 AWG Copper
Product Description
Back to Top

Tempra 24 Tankless Water Heater from Stiebel-Eltron

	92F rise in water Temperature at 1GPM  75F Rise at 2GPM  54F Rise at 3GPM  41F Rise at 4GPM This unit will heat an average 2000sqf 3Bed 2Bath home, it will provide for 2 heavy water use applications at once, This means 2 showers can be taken at a time or other heavy uses, including tub filling which the smaller units just can't do.(Depending on ground water temperature)
Product Description	Dimensions: 14 1/2" W x 14 1/2" H x 4 5/8" D Weight: 21 Pounds Materials: All Copper Internals Water Connections: 3/4" NPT Voltage: 240 VAC Std. Breaker Requirement: two 60 AMP Recommend Wire Size: two 6 AWG Copper Energy Efficiency: Up to 99.5%
Back to Top

TEMPRA 29 - Tankless Water Heater

	Tempra 29 Provides 92F rise in water Temperature at 1.5GPM, 87F Rise at 2.25GPM, and 66F Rise at 3GPM, and 44F Rise at 4.5GPM The Tempra 29 unit is desiged to work in cold areas where smaller units will not work. This unit will heat an average 2-3 bath home, it will provide for 2-3 heavy water use applications at once, This means 2-3 showers can be taken at a time or other heavy uses, including tub filling which the smaller units just can't do.(Depending on ground water temperature)
Product Description	Dimensions: 21" W x 14 1/2" H x 4 5/8" D Weight: 24.25 Pounds Materials: All Copper Internals Water Connections: 3/4" NPT Voltage: 240 Wattage: 28.8 kW Breaker Requirement: three 50 AMP Recommend Wire Size: three 8 AWG Copper
Back to Top

TEMPRA 36 Tankless Water Heater

	Tempra 36 Provides 92F rise in water Temperature at 1.5GPM, 92F Rise at 2.25GPM, and 82F Rise at 3GPM, and 55F Rise at 4.5GPM Tempra 36 unit is desiged to work in cold areas where smaller units will not work. The Stiebel Tempra 36 will heat an average 3-4 bath home, it will provide for 3-4 heavy water use applications at once, This means 3-4 showers can be taken at a time or other heavy uses, including tub filling which the smaller units just can't do.(Depending on ground water temperature)
Product Description	Dimensions: 21" W x 14 1/2" H x 4 5/8" D Weight: 24.25 Pounds Materials: All Copper Internals Water Connections: 3/4" NPT Voltage: 240 Wattage: 36 kW Breaker Requirement: three 60 AMP Recommend Wire Size: three 6 AWG Copper Energy Efficiency: Up to 99.5% Maximum Gallon Per Minute Recommanded by Manufacturer: 8 GPM
Back to Top

Water Service Valve

	Item Name:  Water Service Valve Item Price: $89.00 Item SKU:   RTG20111 - Made by for Rheem  by Dormont   Replaces AP13892
	Item Name: Webstone Water Service Valve Item Price: $125 Item SKU:   AP13892 - Made by Webstone for Rheem
Product Description	Water Service Valves These hot and cold water service valves simplify installation and service by combining multiple valves and connections in a single part. These valves are referred to by Rheem as model: AP13892 and are created by RWV as model: 9600R for Rheem's tankless water heater systems.
Back to Top

SHARKBITE

	Item Name:  SHARKBITE® WATER HEATER Instalation Kit 3/4 x 3/4 Item Price: $18.000 Item SKU:   22441
	Simplifies the connection of water distribution pipe within a water heater system.   Instant push-fit connection for simplified water heater pipe installation. Certified to 200 psi and 200°F (93°C). Fits OD controlled copper, CPVC, or PEX pipe. Includes demount clip and 2 SharkBite® Push Fittings. Body composed of solid DZR brass.   The SharkBite® Push-Fittings™ have been design certified and listed to ASSE 1061/NSF 61. The SharkBite® Push-Fittings™ are listed by IAPMO and are certified for potable and hydronic heating water distribution (note: Glycol mixture for hydronics is not to exceed 50% concentration). The SharkBite® Push-Fittings™ have been certified for underground applications and as a manufactured joint without access panels and they meet UPC, IPC and cUPC requirements. How Sharkbite Fittings Work PDF
Back to Top